Welcome To KET

NOx Sensor 5WK9 6618D

The Nitrogen Oxygen Sensor 5WK9 6618D is part of a NOx reduction aftertreatment system in diesel vehicles using a urea-based SCR system. In 5WK9 6618D Nitrogen Oxygen Sensors, NOX is separated into nitrogen and oxygen by catalytically active electrodes. The Nitrogen Oxygen Sensor 5WK9 6618D can simultaneously measure and exhaust NOx, which can quickly and accurately detect the NOx concentration level in the gas.

Product Features:

Nitrogen Oxygen Sensor OEM No.5WK9 6618D
Independent research and development of signal processing and software and hardware control, compatible with the best detection technology
Independent research and development of highly integrated, reliable and low-cost dedicated chips
1. Good quality: We have strict quality standards and good reputation.
2. Low MOQ: It can meet your promotional business.

nox sensor 5wk9 6618d 1

Product Parameters:

OEM No.5WK9 6618D
Model Number:5WK9 6618D
OEM NO:51.15408-0015
Kreation Model #:K10900

Measuring Rang of NOx 0~2500ppm O2: -12%~21%
Precision/Accuracy of NOx 0~100ppm:±10ppm;100~500ppm:±10%;

500~1500ppm:±15%; 1500~2500ppm:±30%

Precision/Accuracy of O2 0%~5%:±0.25%;5%~21%:±5%
Light-off The measurement status can be reached within 160 seconds
Response Time T(10-90%): NOx<5300ms

T(10-90%): O2<4900ms

Supply Voltage 24V
Length of Cable 410mm.650mm,950mm,customized
Discharge Temperature 800℃
Place of Origin HuZhou,Zhejiang,China
Part Name Nitrogen Oxygen Sensor

nox sensor 5wk9 6618d 2

Application and After-Sales Service:

OEM No.5WK9 6618D
Each product will be tested before shipment, if you have any questions about our products, please contact us as soon as possible, we will reply as soon as possible.

Hardware: Nitrogen and oxygen sensor probe automatic production line (powder press-fit, air tightness test, protective cover press-fit, laser welding, wire harness installation, functional test, automatic unloading, test position data will be recorded and uploaded to the MES system), probe Needle burn-in equipment (data logging and uploading to MES system), SCU production line (dispensing, spot welding, curing, laser marking, calibration), packaging.

IT systems: All process data from order to product delivery (parts, material procurement) are recorded in ERP and MES systems, quality management systems (tracking each test location, each batch of material, each core component such as PCBA and ceramics chip) to achieve process tracking quality analysis and management.

nox sensor 5wk9 6618d 3


*Please Feel Free To Leave Your Needs Here, A Competitive Quotation Will Be Provided According To Your Requirement.

Please Choose:
Name * Email *
Tel Country Message *