The NOx sensor 5WK9 6786 is part of a NOx reduction aftertreatment system in diesel vehicles using a urea-based SCR system. In 5WK9 6786 NOX sensors, NOX is separated into nitrogen and oxygen by catalytically active electrodes. The NOx sensor 5WK9 6786 can simultaneously measure and exhaust NOx, which can quickly and accurately detect the NOx concentration level in the gas.
NOx Sensor OEM No.5WK9 6786
Independent research and development of signal processing and software and hardware control, compatible with the best detection technology
Independent research and development of highly integrated, reliable and low-cost dedicated chips
MOQ depends on our your demands, we welcome trial order before mass production. Send me email for more details.
OEM No.5WK9 6786
Model Number:5WK9 6786
Voltage:24V
OEM NO:89463-E0480
Kreation Model #:K11000
Measuring Rang of NOx | 0~2500ppm O2: -12%~21% |
Precision/Accuracy of NOx | 0~100ppm:±10ppm;100~500ppm:±10%;
500~1500ppm:±15%; 1500~2500ppm:±30% |
Precision/Accuracy of O2 | 0%~5%:±0.25%;5%~21%:±5% |
Light-off | The measurement status can be reached within 160 seconds |
Response Time | T(10-90%): NOx<5300ms
T(10-90%): O2<4900ms |
Supply Voltage | 24V |
Length of Cable | 410mm.650mm,950mm,customized |
Discharge Temperature | 800℃ |
Place of Origin | HuZhou,Zhejiang,China |
Part Name | NOx sensor |
OEM No.5WK9 6786
Application:Truck
Warranty:1Year Each probe is completed by a fully automatic production line. There are 2 inspections in the production of the probe, and each probe is activated 24 hours. Products will be 100% tested and calibrated before shipment.
Hardware: NOx sensor probe automatic production line (powder press-fitting, air tightness testing, protective cover press-fitting, laser welding, wiring-harness installation, function testing, automatic blanking, testing position data will be recorded and uploaded to the MES system ), probe aging facility (data recorded and upload to the MES system), SCU production line (dispensing the glue, spot welding, curing, laser marking, calibration), package.
IT system: from order to product deliver (parts, material sourcing) all of process data are recorded in ERP and MES system, Quality Management System (tracing every test position, every batch material, every core part such PCBA and ceramic chip) realize process tracing for quality analysis and management.